National Repository of Grey Literature 29 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Experimental testing of minimixer for waste water treatment
Luňák, Pavel ; Štefan, David (referee) ; Rudolf, Pavel (advisor)
This thesis deals with various ways of mixing mainly liquids. The theoretical part is devoted to the distribution of mixers, including a description of their characteristics, advantages, disadvantages and applications. The experimental part is devoted to the measurement of minimixers, which were developed and manufactured V. Kaplan Department of Fluid Engineering. This section contains a proposal of measuring ciruit to determine the hydraulic characteristics of minimixers and the degree of mixing. The measurement results and their evaluation is summarized in the conclusion.
Computations of fluid flow in stirred reactor with floating particles
Földváry, István ; Broukal, Jakub (referee) ; Hájek, Jiří (advisor)
The main goal of this master’s thesis is to investigate the drawn down of floating particles in mechanically stirred vessels. The first part of the thesis summarizes necessary theory to cope with defined objectives of the thesis. The literature review of mixing reactors with floating particles can be found in this part of the work as well. The second part of the master’s thesis includes the preparation of the stirred tanks CFD model, simulation and comparing of experimental data from literature, as well.
Heat insulating moulded refractory concretes
Bednárek, Jan ; Bartoníčková, Eva (referee) ; Šoukal, František (advisor)
The thesis deals with the possibility of specific weight lowering of kaolin suspensions using air-entraining agents. These agents are usually used as concrete admixtures. The goal of the thesis is to verify an alternative possibility of creating porous structure in kaolin suspensions in order to prepare heat insulating moulded refractory concretes without using lightweight fillers. The effect of several air-entraining agents was compared, after that the dosage of agent and mixing conditions were optimized. The stabilization of prepared foams and practical application of selected agents were also part of the thesis.
Formation of microsuspension by perikinetic and orthokinetic koagulation
Fojtíková, Radka ; Mega, Jaroslav (referee) ; Dolejš, Petr (advisor)
This diploma thesis is focused on study of physico-chemical influences on model surface-water treatment which contain humic compounds. From those factors were monitored especially the dose of destabilizing reagent, pH value, temperature, velocity gradient of mixing and time of its duration. As destabilizing reagents were used Al2(SO4)3 .18H2O a Fe2(SO4)3 . 9H2O.
Design of optimal mixing of large-scale digesters
Bradáč, Antonín ; Bělohradský, Petr (referee) ; Zejda, Vojtěch (advisor)
The aim of this diploma thesis is an optimal method of mixing of the digester with consideration to the uniform mixing of the whole volume, ensuring the quality process conditions for the anaerobic fermentation and the maximum yield and quality of the produced biogas. First chapters describe the basic design parameters, general calculations and the principles for design of individual types of mixers, supplemented by practical examples of mixing large capacity tanks. The work introduces the problem of sludge formation at the sewage treatment plant with an emphasis on sludge treatment and the processes which take place inside the fermenter. Various types of design of anaerobic sludge stabilization digester were introduced. Also ways of their operation, which are necessary for the quality of the fermentation, were presented. In the next chapters, various ways of mixing high-capacity digester tanks and experience from the operation of selected treatment plants were described. According to the theoretical research part of this thesis, several types of mixing equipment was designed for the experimental digestion tank built at the Institute of Process Engineering which is used for research work with mixers. Measurement of the selected pneumatic mixing method was performed on the experimental tank and the findings were evaluated.
Mixing and kneading machine
Kopáček, Petr ; Anderle, Martin (referee) ; Prokeš, František (advisor)
This diploma work deals with design of the mixing and kneading machine which works with heated mixed components. The components consist of PET, HDPE, silica sand and additives. First, there is introduced knowledge from accessible sources, which are concerned with the theme. Then follows projection of variants and selection of suitable solution. With the help of obtained konwledge and the chosen variant is performed design proces. In the end is created a concept assemble of the machine. The design proces includes projecting of the individual parts, strength verification of the basic elements and design of heating device.
Hydrodynamic mixing of water-ask mixture in vessel
Holub, Přemysl ; Franc, Zdeněk (referee) ; Habán, Vladimír (advisor)
Master´s thesis Hydrodynamic mixing of water-ash mixture in vessel is interested in describing fluid and solid particles flow in a vessel. The mixing was conducted in cylindrical vessel by a radial nozzle. The goal of the thesis is to describe flow field and places where the most of the particles are descending according to position, depth, flow rate and nozzle orientation in the vessel. An experiment was conducted in order to investigate and document 8 different positions and orientation of the nozzle. Significant changes in flow fields and mixing time were observed. A mathematical model of the vessel with the nozzle was created in Fluent program. Places with the lowest velocities according to the model were in good agreement with places where the most of the solid particles were descending.
Influence of stabilizers and other components on final quality of mixtures for ice-cream production
Sládková, Veronika ; Obruča, Stanislav (referee) ; Márová, Ivana (advisor)
Presented diploma thesis was focused on study of influence of stabilizers and other components on final quality of mixtures for ice-cream production. This thesis was worked out in cooperation with Frujo Co., Ltd., Tvrdonice to find out the most suitable stabilizer with positive influence on the quality of final product. In experimental part six mixtures of stabilizers, three mixtures for ice-cream production and particular ingredients for production of mixtures for ice-cream production were analysed. Saccharides and lipids were analysed only in mixtures of stabilizers. Content of saccharides was analyzed using spectrophotometry and HPLC/RI. Lipid components were analysed by TLC. Viscosity was measured by rotatory viscosimeter and the differences of flow curves of each mixture with different stabilizers were monitored. Based on viscosity measurements some ice-creams with different stabilizers were chosen for sensory analysis. Mixture of stabilizers “Stobicol” was analysed for active compounds and antioxidant stability. Microbiological stability was tested in all of the stabilizers and also in particular ingredients including final mixture for ice-cream production. In three ice-cream mixtures of different flavour protein composition was measured by microfluidic electrophoresis. The highest content of total and reducing saccharides was determined in hydrolyzed samples. The highest values of total saccharides were found in mixture of stabilizers “Meyprogen”, the highest values of reducing saccharides were detected in stabilizer “Swissgum”. Content of triglycerides was found out almost in all of the measured mixtures of stabilizers using TLC method even though according to formulas provided by producers there should not be any. Diglycerides were detected in “Meyprogen” too even though this mixture of stabilizers should contain only saccharides. Based on results of rheology measurements and in connection with sensory analysis “Meyprogen” stabilizer could be recommended as the best material for the industrial production.
Treatibility of surface water
Fuks, Josef ; Palčík,, Jiří (referee) ; Kučera, Tomáš (advisor)
The aim of the master´s thesis is the topic of the treatability of surface water with the focus on the process of suspension formation. For this work I took water samples from five different places around the Brno Dam which has contended with water quality deterioration for a long period. With these water samples, the series of jar coagulation tests were done with the application of three different commonly used coagulants. In the theoretical part of the master´s thesis I deal with the composition and attributes of surface water and the technology of its treatment. Each process of treatment is briefly described here with the emphasis on the process of suspension formation. The experimental part of the master´s thesis summarizes and presents the results gained through the coagulation tests in the laboratory. I evaluate the influence of different parameters on final effectiveness of water treatment and I try to find an optimal amount of coagulant, pH and speed of fast or slow mixing. Finally I compare the suitability of each coagulant and the influence of the sampling site on the effectiveness of water treatment.
Device for magnetic stirring of suspension with ferromagnetic particles
Zítka, Jan ; Knobloch, Jan (referee) ; Červinka, Dalibor (advisor)
The aim of this work deals with the design and manufacture of a device for mixing of magnetic beads in solution by magnetic field. It is based on my previous bachelor thesis, where the device was created for one microtube (one sample). In this following work, the three improved variants for mixing and separation of 96 samples at one time were designed. The first variant of device, derived from functional prototype from bachelor thesis, was manufactured. First, the magnetic circuit and power converter were designed. Subsequently, the device was manufactured just for one microtube due to functionality testing. The third variant was realized only experimentally, the construction was designed in CAD program, and individual parts were created using 3D printer. As an alternative solution, which should be the compromise among electromagnetic and mechanical stirring, additional prototype was manufactured using 3D printer and CNC instrument. This prototype utilizes neodymium magnets and a stepper motor. The capability of magnetic beads mixing in solution was verified.

National Repository of Grey Literature : 29 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.